Aermacchi, AJS, Allstate, AMC, American Eagle, Aprillia, Ariel, Benelli,
Bridgestone, BSA, Bultaco, Cagiva, Canam, Carabella, GZ, DKW, Dot, Ducati,
Dunstall, EMC Fantic, Fichtel & Sachs, Garelli, Gilera, Hercules,
Hodaka, Husquavarna, Indian, Italjet, Jawa, Kreidler, KTM, Lambretta,
Laverda, Maico, Malaguti, Matchless, Mondial, Monet-Goyon, Montesa,
Motobécane, Motobi, Motoguzzi, Motomorini, Moto Trans, Munch, MV
Augusta, MZ, Norton, N.S.U., OSA, Parilla, Panther, Penton, Peugot, Puch,
Sanglas, Scott, Triumph, Velocette, Vespa, Villiers, Vincent, Zundapp.
And many other applications for British, German, Italian & other
make current or obsolete.
BMW (Street) Mikuni Tm Prejetted Carburetor
Kits |
Application | Features | No. MC | Price |
R75, R80, R65 |
2TM 36mm spigot, 2 throttle cables,
prejetted kit |
|
650.00$ |
|
R90, R90S, R100 |
2TM 38mm spigot,
2 throttle cables,
prejetted kit |
|
650.00$ |
|
Please specify model for correct jetting & mounting. |
|
CAGIVA & DUCATI (Racing)
Mikuni Tm Prejetted Carburetor Kits |
Application | Features | No. MC | Price |
*1 cyl. 250, 350 & Desmo |
1TM 32mm spigot, prejetted kit, 1 rubber 45° tube, tube mount manifold
to adapt to stock reworked manifold |
|
325.00$ |
|
*1 cyl. 450 & Desmo |
1TM 38mm spigot, prejetted kit, 1 rubber 45° tube, tube mount manifold
to adapt to stock reworked manifold |
|
345.00$ |
|
*Due to bulk of the carburator,
fitting might involve modification of cycle parts. |
Please specify model for correct jetting & mounting. |
|
CAGIVA & DUCATI (Racing)
Mikuni Tm Prejetted Carburetor Kits |
Application | Features | No. MC | Price |
Pantah 500, 600, 650, F1 750 |
2 TM 38mm spigot, prejetted kit, 2 rubber
tubes, manifold adapter |
|
675.00$ |
|
All Bevel twins 750,750S, 750SS,860,900 Darmah |
2 TM 38mm spigot, prejetted kit, 2 rubber
tubes, manifold
adapter |
|
675.00$ |
|
(Above motorcycles must be fitted with
Ducati 40mm manifold) |
900 Darmah SS, 900SS, 900 Hailwood Mille |
2 TM 38mm spigot, prejetted kit, 2 rubber tubes, manifold adapter |
|
675.00$ |
|
Clamp-on are available for Street & Racing carbs. kit, but some
shimming may be required. |
Please identify model & state of tune when ordering any of the above
Mikuni carburator kits. |
|
CAGIVA & DUCATI (Racing)
Mikuni TM Prejetted Carburetor Kits |
Application | Features | No. MC | Price |
* Bevel, Pantah, * Paso, * New generation
750S,
750SS, 900SS |
2 TM 41mm spigot, Paso hand-machined Venturi
Aria, 2 rubber tubes, manifold adapter, Jetting to your
requirement |
|
1060.00$ |
|
|
* Paso 750, * New generation
750, 750SS |
2 TM 38mm spigot, prejetted kit
1 rubber manifold adapter |
|
650.00$ |
|
* Bevel twins must be fitted with 40mm SS type manifold |
Paso & New generation 750S, 750SS must
be fitted with
a Pantah type manifold for the horizontal cylinder. |
Clamp on available but some shimming may be required. |
|
LAVERDA Mikuni Tm Prejetted Carburetor Kits
|
Application | Features | No. MC | Price |
500 Twins Monjuic |
2 TM 32mm spigot, prejetted kit, 2 rubber tubes, manifold adapter
|
|
635.00$ |
|
Racing only * 500 Twins Monjuic |
2 TM 36mm spigot prejetted kit,
2 rubber tubes, manifold adapter |
|
675.00$ |
|
*Racing only jetted to your
requirement, must have bigger manifolds. |
Street & Racing 750SF, 750SFC |
2 TM 36mm spigot prejetted kit, 2 rubber tubes,
manifold adapter |
|
675.00$ |
|
Please identify model & state of manifold adapter
tune when ordering any of the above carburetor. |
Racing only * 750SF, 750SFC |
2 TM 38mm spigot prejetted kit, 2 rubber tubes, manifold adapter |
|
675.00$ |
|
*Racing only jetted to your
requirement, Clamp-on available, shimming may be
required. |
|
MOTOGUZZI Mikuni Tm Prejetted Carburetor Kits
|
Application | Features | No. MC | Price |
Street & Racing V50, Monza |
TM 28mm spigot prejetted kit |
|
400.00$ |
|
Street, V700, V750, V850, V1000 |
TM 36mm spigot prejetted kit Must be fitted with
Lemans manifolds. |
|
640.00$ |
|
Street & Racing, V700, V750, V850, V1000 |
TM 38mm spigot prejetted kit, Must be fitted with Lemans manifolds. |
|
300.00$ |
|
Racing, Lemans 850, Lemans 1000 |
TM 31mm spigot Pro series, hand machined Venturi area, jetting to your requirements |
|
1020.00$ |
|
Kits consist of Mikuni round slide VM type carburators,
comes complete with manifold, rubber flanges and usual jets.
Norton Mikuni Vintage Performance Kits
|
Application | Features | No. MC | Price |
750 Atlas Increase low end power |
1 x VM 34mm |
03-400 |
420.00$ |
|
750 P11 750 Commando Increase mid range |
1 x VM 36mm |
03-401 |
450.00$ |
|
850 Commando 750 Matchless NCS/5 increase top end power |
1 x VM 38mm |
03-402 |
460.00$ |
|
All kits includes 1 manifold, 1 rubber flange, prejetted. |
|
TRIUMPH 1969 mid 70, Bonneville
Mikuni Vintage Performance Kits |
Application | Features | No. MC | Price |
Low end power |
2 x VM 30mm |
03-420 |
715.00$ |
|
Mid range power |
2 x VM 32mm |
03-421 |
780.00$ |
|
Top end power |
2 x VM 34mm |
03-422 |
740.00$ |
|
All kits includes manifold adapter, air cleaners, hose clamps, prejetted. |
|
TRIUMPH 1973 to 1978, Bonneville
Mikuni Vintage Performance Kits |
Application | Features | No. MC | Price |
Low end power |
2 x VM 30mm |
03-423 |
715.00$ |
|
Mid range power |
2 x VM 32mm |
03-424 |
780.00$ |
|
Top end power |
2 x VM 34mm |
03-425 |
740.00$ |
|
All kits includes manifold adapter, air cleaners, hose clamps, prejetted. |
|
TRIUMPH 1947 to 1981, TR6 & TR7
Mikuni Vintage Performance Kits |
Application | Features | No. MC | Price |
Low end power |
VM 30mm |
03-426 |
450.00$ |
|
Mid range power |
VM 32mm |
03-427 |
460.00$ |
|
Top end power |
VM 34mm |
03-428 |
460.00$ |
|
All kits includes manifold adapter, air cleaners, hose clamps, prejetted. |
The TM & VM carburator bodys are design to accept
a power jet pump kit. The power jet
prevents leaning out of the gas mixture during sudden acceleration. |
Mikuni Power Jet Kits |
Application | Features | No. MC | Price |
VM & TM Mikuni carburator |
Power jet pump kit |
03-500 |
0.0$ |
|
Main Jets Sloted Type Round |
Size | No. MC | Price
|
100 to 200 in increments of five |
03-600 |
60.00$ |
|
Please state size you need when ordering. |
Mufflers
27'' chrome, same sound as the famous
Conti mufflers.
- full flow design
- left or right side fitting
- sliding bracket
- removable baffle
- no jetting for Conti replacement
EMGO Mufflers
The most affordable OEM pattern type
replacement muffler available for European motorcycles. Manufactured in Asia
according to strict controls.
MAC products USA
MAC is a company with high standards of quality which manufacture the
best selling replacement motorcycle
muffler in America. The European line is a sensation in both durability and
design.
Hard Parts
BMW Oil Filters |
Application | Features | No. MC | Price |
Boxer |
Straight |
|
6.95$ |
|
Boxer |
Short hinge type |
|
8.95$ |
|
Boxer |
Long hinge type Oil cooler |
|
8.95$ |
|
K75, K1000, K1 |
Spin on |
|
16.95$ |
|
  |
Ducati Oil Filters |
Application | Features
| No. MC | Price |
860, 900 Bevels |
Cartridge |
|
21.50$ |
|
Pantah 500,600,650 Cagiva 600,650 Paso
750,906,900SS,851 |
Spin on |
|
21.50$ |
|
  |
Motoguzzi Oil Filters |
Application | Features | No. MC | Price |
650 Lario 850, 1000 twins |
Spin on |
|
21.50$ |
|
  |
British Oil Filters |
Application | Features | No. MC | Price |
Triumph, BSA 3 cyl |
OEM 70-65171 Cartridge |
05-130 |
8.95$ |
|
Norton Commando |
Spin on |
|
13.95$ |
|
  |
BMW Air Filters |
Application | Features | No. MC | Price |
Boxer 1970-1980 |
Round |
|
17.95$ |
|
  |
Gas Filters |
Application | Features | No. MC | Price |
In line |
Visu clear plastic |
|
3.95$ |
|
Seal Kits
Valve Guides
We manufacture valve guides for many European motorcycle Application s.
Our
guides are made of magnesium bronze which contains a self
lubricating characteristic. These guides are a perfect
replacement and can be used with non-leaded gazoline.
Guide types and features:
S Our standard type guide
S/VS Same as S type but specially machined for fitting of valve
stem seal
S/G S type with special spiral grooving feature of guide
interior. The
spiral groove design creates a fresh oil flow supply between the
valve stem and guide without any oil entering the valve seat
area. This feature will reduce dramatically valve stem heat,
adding to power and extending valve guide life.
Valve guides are available in 3 OD sizes: STD, +0.002 ",
+0.004".
Big oversizes,
customs, obsoletes Application s can be manufactured for a small
premium. Please send us your old guide and your requirement or a
blue print type drawing with exact specifications.
Valves seals are available by the unity.
BMW Valve Guides
Intake/Exaust |
Application | TYPE | No. MC | Price |
R75,R80,R90,R90S, |
S |
|
20.00$ |
|
R100,S,CS,RS,RT 1969+ |
S/VS |
|
20.00$ |
|
|
S/G |
|
22.00$ |
|
K75, K100, K1 |
S |
|
20.00$ |
|
|
S/VS |
|
20.00$ |
|
|
S/G |
|
22.00$ |
|
R65,R65LS |
S |
|
20.00$ |
|
|
S/VS |
|
20.00$ |
|
|
S/G |
|
22.00$ |
|
DUCATI Valve Guides Intake/Exaust
|
Application | TYPE | No. MC | Price |
Cagiva, Pantah |
S |
|
20.00$ |
|
500, 600, 650, 750 |
S/VS |
|
20.00$ |
|
Paso750, 906, |
S/G |
|
22.00$ |
|
907LE, 750SS, 900CS |
250, 350, 450, |
S |
|
20.00$ |
|
Bevel750, 860, 900 |
S/VS |
|
20.00$ |
|
|
S/G |
|
22.00$ |
|
LAVERDA & AMERICAN EAGLE Valve Guides
Intake/Exaust |
Application | TYPE | No. MC | Price |
650, 750SF, |
S |
|
20.00$ |
|
750SFC, 1000, 1200 |
S/VS |
|
20.00$ |
|
|
S/G |
|
20.00$ |
|
MOTOGUZZI Valve Guides Intake/Exaust |
Application | TYPE | No. MC | Price |
Monza, V50,V65, |
S |
|
20.00$ |
|
Lario, 700, 750, |
S/VS |
|
20.00$ |
|
850, 1000 |
S/G |
|
22.00$ |
|
Piston Ring Set
Our replacement rings for European motorcycles are of a modern
design, using ductil metal materials for the top and middle rings and
a very efficient oil scraper for the oil control ring.
Advantages over OEM rings:
- fast brake ins;
- minimal wear of cylinder walls;
- positive sealing adding power;
- long lasting;
- excellent oil control.
BMW Piston Ring Set |
Application Features | TYPE
| No. MC | Price |
R60/5/6/7 |
73.5mm |
|
50.00$ |
|
R65 - 1980 * R75/5/6/7 |
82mm |
|
50.00$ |
|
R65, 1981+ |
82mm |
|
50.00$ |
|
R90/5/6 |
90mm |
|
50.00$ |
|
R100, 1977-80 |
94mm |
|
50.00$ |
|
R100, 1981+ |
94mm |
|
50.00$ |
|
*Piston rings not suitable for chrome
face or nikasil walls.
|
BSA Piston Ring Set |
Application Features | TYPE
| No. MC | Price |
250cc, 1967-70 |
67mm/2.638" |
|
50.00$ |
|
650cc Golden Flash |
70mm/2.756" |
|
50.00$ |
|
1950-63 |
650cc, 1963-70 |
75mm/2.953" |
|
50.00$ |
|
441cc, 1966-770 |
79mm/3.11" |
|
50.00$ |
|
DUCATI Piston Ring Set |
Application Features | TYPE
| No. MC | Price |
1 Cyl. 250cc |
74mm |
|
50.00$ |
|
3 ring piston |
1 cyl. 350 |
76mm |
|
50.00$ |
|
3 ring piston |
750 Bevel |
80mm |
|
50.00$ |
|
1 cyl. 450 |
86mm |
|
50.00$ |
|
860 Bevel |
MOTOGUZZI Piston Ring Set |
Application Features | TYPE
| No. MC | Price |
850 Lemans * |
83mm |
|
50.00$ |
|
1000, 1976-84 |
88mm |
|
50.00$ |
|
* Piston rings not suitable for chrome face or
nikasil
walls. |
TRIUMPH Piston Ring Set |
Application Features | TYPE
| No. MC | Price |
250cc, 1976-70 |
67mm/2.638" |
|
50.00$ |
|
750cc 3cyl.1969-75 |
490cc, 1959-70, |
69mm/2.717" |
|
50.00$ |
|
OHV speed twin, |
STA Tiger 100, |
T100A, 1971, T100R, |
Daytona, T100C, Trophy 500 |
650cc, 1966-75 |
71mm/2.795" |
|
50.00$ |
|
Note: |
Oversize rings available on special order |
+0.5mm/0.20", +0.75mm/0.30",
+1.00mm/0.40" |
Clutches
We have been
working hard towards finding a better clutch for BMW motorcycles.
>From experience we can not fault the BMW clutch system.
Unfortunately the OEM clutch plate is very limited in service,
having a tendency to heat up and fade under pressure, causing
undue wear to the friction parts of the clutch assembly (clutch
plate, pressure ring, pressure plate). Presently there are a few
racing clutches on the market which cost considerably more. These
clutches are very limited in use and the extra expense is a
drawback to the average motorcyclist. Fortunately we were able to
find a worthy affordable solution, which consist of relining the
worn out clutch plate with a better friction material. This new
Hi-tech composite is used extensively in racing cars and heavy
duty Application s, it is virtually the best we have seen yet. The
relined clutch plate runs much cooler, it is fade free and seems
to last for ever.
We stock these
items for all BMW models using a single clutch plate. The relined
clutch plates are sold under an exchange policy only. We will
send you the clutch when we receive the old one.
We also have a
money saving reclaiming service for worn pressure rings.
N.B. |
Remember that the OEM
clutch plate has an average life
of 30,000 Km under normal
use. At that point the clutch plate will be worn out or packed
with debris baked on the clutch plate from repeated over heating.
A packed up clutch plate will score the expensive pressure ring
and plate eventually causing severe fading and chattering. When
replacing the clutch always grease the inner spline with graphite
grease to avoid wear of the transmission input shaft. |
EZ Clutch
makes stiff or sticky clutches work effortlessly by reducing
amount of force required to pull in the clutch by up to 44%!
Allows use of stiffer clutch springs.
note: |
modifications might be necessary for Application on particular
machine. |
Electrical Parts
Rebuilt Alternator & Starter
We stock rebuilt alternator & starters for the Bosch system. Core
deposit required. We also have most of these parts used at 1\2"
price of new.
Rebuilt Alternator & Starter |
Application | Features | No. MC | Price |
BMW, GUZZI Twins |
Alternator/Stator |
|
150.00$ |
|
BMW Boxers, GUZZI Twins |
Starter
complete |
|
225.00$ |
|
BMW Boxers, GUZZI Twins |
Alternator
carbon brushes set |
|
15.95$ |
|
Fuse Carrier |
American glass type replacement fuse carrier replaces
troublesome European ceramic fuse arrangement. |
Application | Features | No. MC | Price |
Ducati, Laverda, Motoguzzi, Benelli |
Provision for 4 fuses |
06-130
|
14.50$ |
|
Ducati, Laverda, Motoguzzi, Benelli |
Provision for 6 fuses |
06-131 |
14.95$ |
|
  |
Voltage Regulator |
Application | Features | No. MC | Price |
BMW Boxer, Laverda 500, 750, 1000, 1200,
Motoguzzi 500,650, 750,850,1000 |
Bosch Electronic 12 V |
|
52.50$ |
|
  |
Zehner Diode |
Application | Features | No. MC | Price |
Most British Motorcycles |
Replace Lucas 49345 |
06-160 |
35.00$ |
|
  |
Rectifier |
Application | Features | No. MC | Price |
British Bikes |
Replaces Lucas 49072 |
|
49.00$ |
|
  |
Oil Pressure Switch |
Application | Features | No. MC | Price |
BMW Boxers 70-73 All Motoguzzi |
Bosch |
|
19.95$ |
|
BMW Boxers 74+ |
Bosch |
|
17.95$ |
|
BMW K Series |
Bosch |
|
17.95$ |
|
  |
  |
  |
Ignition Coils           |
|
Ignition Coils |
Application | Features | No. MC | Price |
BMW Boxers 2 required |
6 volts - super Big type single |
|
75.00$ |
|
Ducati 1 cyl. Britsh 6 Volt |
6 volts - super small type single |
|
45.00$ |
|
Ducati 750 Bevel Guzzi 700,750 Vtwins
|
12 volts - super Big type single |
|
75.00$ |
|
Guzzi V7 sport 850, 1000, V twins Laverda
750 |
12 volts - super Small type single |
|
45.00$ |
|
BMW 2 req. Dbl. plugged Heads Ducati 1
cyl Dbl plugged Heads |
6 volts - super Small type Double |
|
75.00$ |
|
Motoguzzi Dbl. plugged Heads |
12 volts - super Small type Double |
|
75.00$ |
|
  |
  |
Ignition Cables |
Application | Features | No. MC | Price |
Most Motorcycles |
Copper core, black exterior 7mm Hypalom, sold in 3' pack |
|
15.00$ |
|
Small bikes or bikes using dist. cap |
Copper core, black exterior 5mm Hypalom, sold in 3' pack |
|
15.00$ |
|
  |
  |
Spark Plug Caps |
Application | Features |
No. MC | Price |
Universal Most popular |
NGK LZFH Best all A round universal 90° elbow cap |
|
5.00$ |
|
British |
KLG tyoe rubber |
|
4.95$ |
|
Turn Signal Assembly
|
|
Bullet & Zepplin Chrome Vintage Looking
Signal Light |
Application | Features | No. MC | Price |
Universal |
Bullett red lens |
|
15.95$ |
|
Universal |
Bullett amber lens |
06-321 |
15.95$ |
|
Universal |
Zepplin red lens |
06-322 |
18.50$ |
|
Universal |
Zepplin amber lens |
06-323 |
18.50$ |
|
Universal |
Lens only red |
06-324 |
2.00$ |
|
Universal |
Lens only amber |
06-325 |
2.00$ |
|
  |
  |
Fairing & Tail Piece Flashers
|
Application | Features | No. MC | Price |
Universal |
White body, amber lens, sold in pairs |
06-330 |
32.95$ |
|
Universal |
Black body, amber lens, sold in pairs |
06-331 |
32.95$ |
|
  |
  |
Flasher Relays |
Application | Features | No. MC | Price |
Universal |
12 volts - 2 poles |
|
7.95$ |
|
Universal |
12 volts - 3 poles |
|
7.95$ |
|
Universal |
6 volts - 2 poles |
|
7.95$ |
|
  |
  |
Signal Buzzer |
Application | Features | No. MC | Price |
Universal |
12 volts - 80 DB |
06-350 |
14.25$ |
|
  |
  |
Tail Light |
Application | Features | No. MC | Price |
Universal |
Complete assembly small Lucas
type |
|
14.25$ |
|
Universal |
Lens only - red |
|
6.95$ |
|
Triumph, Norton, BSA, pre 1976 |
Lens Lucas OEM # 5457-7109 |
06-364 |
8.95$ |
|
Triumph, Norton, BSA, 1976+ |
Lens Lucas OEM
#5458-4930 |
06-366 |
8.95$ |
|
  |
  |
H4 Halogen Bulbs |
Application | Features | No. MC | Price |
Normal |
12 volts - 60/55 watts |
06-370 |
12.95$ |
|
Intense |
12 volts - 100/55 watts |
06-372 |
16.50$ |
|
Off road use |
12 volts - 100/80 watts |
06-374 |
16.50$ |
|
  |
  |
Ignition Switch |
Application | Features | No. MC | Price |
Universal |
6 volts or 12 volts 3 positions 3\4"x
3\4" mounting stem |
|
17.50$ |
|
Universal |
6 volts or 12 volts 2 positions |
|
15.00$ |
|
Universal |
light & horn switch |
|
15.00$ |
|
  |
  |
Wire Identification Sticker |
Application | No. Mc
| Price |
Rewiring work/ marker kit |
|
18.95$ |
|
  |
  |
Heat Shrink |
Application | Features | No. MC | Price |
Wire repair sealing jacket |
1/8" diam 12" / Pack of 5 |
|
8.95$ |
|
Wire repair sealing jacket |
1/4" diam 12" / Pack of 5 |
|
9.95$ |
|
Wire repair sealing jacket |
3/8" diam 12" / Pack of 5 |
|
10.95$ |
|
Front Suspension
Improve the front suspension of your motorcycle with a new set of
Progressive Suspension heavy duty fork springs.
Progressive Suspension Series 12 and 416
Gas charged with six stage automatic damping
function and adjustable preload, these shocks are the best value on
the market today. Series 1200 shock are sold without springs. Springs
must be ordered separately. If desired, shock and springs can be
assembled together for a shop charge of $10 each.
REAR SHOCKS (mono)
*: System para lever
Tools
Precision Tools
Oil Filter Wrench | |
Application | Features | No. MC | Price |
BMW K1, K100 K1100, K75 |
OE type oil filter socket |
08-170 |
$21.95 |
|
Cavagia, Ducati, Guzzi, Spin on type |
OE type oil filter
socket |
08-175 |
$21.95 |
|
|
Battery Charger | |
Application | Features | No. MC | Price |
6 & 12 V / 0.5 A |
Small economical |
08-180 |
$29.50 |
|
6 / 0.6 A |
Small economical |
08-181 |
$29.50 |
|
12 V / 0.5 A |
Small economical |
08-182 |
$29.50 |
|
|
Tire Lever | |
Application | Features | No. MC | Price |
All Motorcycle ATV |
Straight 16" long |
|
$13.25 |
|
& car tires |
Michelin curved 16" |
08-212 |
$14.25 |
|
|
Spoke Wrench | |
Features | |
No. MC | Price |
2 pieces Kit |
|
|
$6.95 |
|
Rowe products |
|
08-225 |
$9.95 |
|
|
Impact Driver Set | |
Features | |
No. MC | Price |
1/2" drive reversibel 4 bits:
#1 flat #2 flat #1 Phillips #2 Phillips |
|
08-230 |
$20.95 |
|
Spare Bits | |
Features | |
No. MC | Price |
#2 Phillips short |
|
08-231 |
$3.95 |
|
#3 Phillips short |
|
08-232 |
$3.95 |
|
#2 Phillips long |
|
08-233 |
$3.95 |
|
#3 Phillips long |
|
08-234 |
$3.95 |
|
#1 Sts Flat short |
|
08-235 |
$3.95 |
|
#2 Sts Flat short |
|
08-236 |
$3.95 |
|
#1 Sts Flat long |
|
08-237 |
$3.95 |
|
|
Spark Plug Wrench | |
Features | |
No. MC | Price |
10mm, 12mm, 14mm, 3 way |
|
08-250 |
$4.95 |
|
|
Safety Wire Twisting Pliers | |
Features | |
No. MC | Price |
Aviation & Racing: Robinson Copy 10 1/2" long Black Tool
steel 8oz |
|
|
$65.95 |
|
This tool is designed to effectively prevent nuts
and bolts from being unfastened. Wire locks into
plier jaws and with a pull the plier will twist
the wire. Spring loaded return action. |
|
Valve Guide Drift | |
Application | Features | No. MC | Price |
BMW Boxers, Cagiva, Ducati, Laverda, Mv Augusta,
Guzzi, Norton, BSA, Triumph etc. |
8 mm solid steel |
08-270 |
$21.95 |
|
BMW K Series, R65, Guzzi V50, Lario V65, Laverda 500 |
7 mm solid steel |
08-271 |
$21.95 |
|
4 Valve Head & Japanese application |
7 mm solid steel |
08-272 |
$21.95 |
|